Install the top cover
Follow instructions in this section to install the server top cover.
About this task
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Go over Installation Guidelines to ensure that you work safely.
Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
- Install the top cover.Figure 1. Installing the top cover
- Place the top cover over top of the server with both sides aligned.
- Rotate the latch down until it stops.
- (Optional) Lock the top cover with a screw driver (direction 2).Figure 2. Top cover locking/unlocking direction
- 1 Unlocking direction
- 2 Locking direction
After this task is completed
Proceed to complete the parts replacement (see Complete the parts replacement).