Install the TCM/TPM adapter (for Chinese Mainland only)
Use this information to install the TCM/TPM adapter.
Before installing the TCM/TPM adapter:
Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
- Disconnect the USB 3.0 cable of operator panel tray assembly, and remove it vertically from the system board.Figure 1. Removing USB 3.0 connector vertically
To install the TCM/TPM adapter, complete the following steps:
- Locate the TCM/TPM connector on the system board (seeSystem-board connectors).
- Insert the TCM/TPM adapter into the TCM/TPM connector on the system board.Note
Figure 2. TCM/TPM adapter installation
Carefully handle the TCM/TPM adapter by its edges.
Your TCM/TPM adapter might look slightly different from the illustration.
After installing the TCM/TPM adapter, complete the following steps:
Install the top cover (see Install the top cover).
Reconnect the power cords and any cables that you removed.
Power on the server and any peripheral devices.