Skip to main content

Install the air baffle

Follow instructions in this section to install the air baffle.

About this task

Attention
Attention
For proper cooling and airflow, reinstall the air baffle before turning on the server. Operating the server with the air baffle removed might damage server components.

Procedure

Note
Close the retaining clip on each end of the memory module connector before installing the air baffle for proper cooling.
Figure 1. Installing air baffle
Installing air baffle

  1. Align the air baffle tabs with the air baffle slots on both sides of the chassis; then, lower the air baffle into the server.
  2. Slightly press the air baffle down until it is securely seated.

After you finish

  1. Reinstall the M.2 backplane if needed.

  2. Complete the parts replacement. See Complete the parts replacement.