Skip to main content

Install the front bezel

Follow this procedure to install the front bezel.

disconnect all power
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Before installing the front bezel:

  1. Read the safety information and installation guidelines (see Safety and Installation guidelines).

To install the front bezel, complete the following step:

Align the three plastic tabs with the corresponding slots on the front of the chassis. Then, pivot the other side of the front bezel towards the chassis until it snaps into place.
Figure 1. Front bezel installation
Installing the front bezel

After installing the front bezel:

  1. Proceed to complete the parts replacement (see Complete the parts replacement).

Demo video

Watch the procedure on YouTube