Skip to main content

Install the power interface board

Use this information to install the power interface board.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening

Before installing the power interface board, touch the static-protective package that contains the new power interface board to any unpainted surface on the outside of the server. Then, take the new power interface board out of the package and place it on a static-protective surface.

To install the power interface board, complete the following steps:

Watch the procedure
  • A video of this procedure is available at YouTube
Figure 1. Power interface board installation
Power interface board installation

  1. Insert the hole in the power interface board into the corresponding mounting stud on the chassis. Then, gently move the power interface board downward so that it is engaged with the mounting stud.
  2. Install the screw to secure the power interface board in place.
After installing the power interface board:

  1. Reconnect all cables to the power interface board. See Power interface board.

  2. Complete the parts replacement. See Complete the parts replacement.