Remove the power interface board

Use this information to remove the power interface board.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Before removing the power interface board:

1. If the server is installed in a rack, remove the server from the rack.

2. Remove the server cover. See Remove the server cover.

3. Remove the air baffle. See Remove the air baffle.

4. Remove all hot-swap power supplies. See Remove a hot-swap power supply.

5. Disconnect all cables from the power interface board.

To remove the power interface board, complete the following steps:

Figure 1. Power interface board removal

1. Remove the screw that secures the power interface board.
2. Gently lift the power interface board upward so that the power interface board is disengaged from the mounting stud on the chassis. Then, carefully remove the power interface board out of the chassis.