Skip to main content

Remove a RAID super capacitor module

Use this information to remove a RAID super capacitor module on the air baffle.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening
Before removing a RAID super capacitor module:

  1. If the server is installed in a rack, extend the server from the rack.

  2. Remove the server cover. See Remove the server cover.

To remove a RAID super capacitor module, complete the following steps:

Watch the procedure
  • A video of this procedure is available at YouTube

  1. Disconnect the RAID super capacitor module from the extension cable.
  2. Gently press the tab on the air baffle and then remove the RAID super capacitor module from the air baffle as shown.
    Figure 1. RAID super capacitor module removal
    RAID super capacitor module removal

If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use any packaging materials that are provided.