Skip to main content

Remove the intrusion switch

Use this information to remove the intrusion switch.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening
Before removing the intrusion switch:

  1. If the server is installed in a rack, extend the server from the rack.

  2. Remove the server cover. See Remove the server cover.

  3. Remove the PCIe adapter retainer. See Remove the PCIe adapter retainer.

To remove the intrusion switch, complete the following steps:

Watch the procedure
  • A video of this procedure is available at YouTube

  1. Disconnect the cable of the intrusion switch from the system board.
  2. Slide the intrusion switch as shown to remove it from the chassis.
    Figure 1. Intrusion switch removal
    Intrusion switch removal

If you are instructed to return the old intrusion switch, follow all of the packaging instructions and use any packaging materials that are provided.