Skip to main content

Remove the serial port module

Use this information to remove the serial port module.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening
Before removing the serial port module:

  1. If the server is installed in a rack, extend the server from the rack.

  2. Remove the server cover. See Remove the server cover.

  3. Remove the air baffle. See Remove the air baffle.

  4. Remove the PCIe adapter retainer. See Remove the PCIe adapter retainer.

To remove the serial port module, complete the following steps:

  1. Disconnect the cable of the serial port module from the system board.
  2. Lift the serial port module out of the chassis.
    Figure 1. Serial port module removal
    Remove the serial port module.

After removing the serial port module:

  1. Install a new serial port module or a slot bracket to cover the place.

  2. If you are instructed to return the old serial port module, follow all of the packaging instructions and use any packaging materials that are provided.