Skip to main content

Creating interface groups

You can use Storage Manager to create an interface group—single-mode, static multimode, or dynamic multimode (LACP)—to present a single interface to clients by combining the capabilities of the aggregated network ports.

Before you begin

Free ports must be available that do not belong to any broadcast domain or interface group, or that host a VLAN.

  1. Click Network > Ethernet Ports.
  2. Click + Link Aggregation Group.
  3. In the Add Link Aggregation Group setup screen, specify the following settings:

    • Node that the Link Aggregation Group will be created on

    • Ports to include

    • Mode to use

    • Load Distribution to use

  4. Click Save.