Set tray identification
The set tray command sets the tray ID of a controller tray, a controller-drive tray, or a drive tray in a storage array.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin role.
Context
This command is valid only for controller trays, controller-drive trays, or drive trays that have tray IDs that you can set through the controller firmware. You cannot use this command for controller trays, controller-drive trays, or drive trays that have a tray ID that you set with a switch.
Syntax
set tray ["<var id="GUID-A363C4CB-53F8-4EE1-A603-7133F174344F__V1111303" className="keyword varname">serialNumber</var>"] id=<var id="GUID-A363C4CB-53F8-4EE1-A603-7133F174344F__V1111304" className="keyword varname">trayID</var>
Parameters
| Parameter | Description |
|---|---|
| tray | The serial number of the controller tray, controller-drive tray, or the drive tray for which you are setting the tray ID. Serial numbers can be any combination of alphanumeric characters and any length. Enclose the serial number in double quotation marks (" "). |
| id | The value for the controller tray tray ID, controller-drive tray tray ID, or the drive tray tray ID. Tray ID values are 0 through 9 or 10 through 99 . Note You do not need to enclose the tray ID value in parentheses. Note Tray values of |
Give documentation feedback