Reset storage array volume distribution
The reset storageArray volumeDistribution command reassigns (moves) all of the volumes to their preferred controller.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin role.
Syntax
reset storageArray volumeDistribution
Parameters
None.
Notes
If you use this command on a host without a multi-path driver, you must stop I/O operations to the volumes until this command has completed to prevent application errors.
Under certain host operating system environments, you might be required to reconfigure the multi-path host driver. You might also need to make operating system modifications to recognize the new I/O path to the volumes.
Give documentation feedback