Skip to main content

Show disk pool

The show diskPool command returns information about a disk pool.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Storage Admin role.

Context​

This command returns this information about a disk pool:

  • The status (such as optimal, online, offline)

  • The total capacity

  • The preservation capacity, usable capacity and unusable capacity

  • The used capacity, free capacity, and percentage full

  • The current owner (the controller in slot

    A or the controller in slot B )

  • The drive media (SAS)

  • The drive media type (HDD or SSD)

  • The drive interface type (Fibre Channel, iSCSI, SAS)

  • Tray loss protection (yes or no)

  • Secure capable - indicates whether the disk pool is composed of all secure-capable drives. Secure-capable drives can be either FDE drives or FIPS drives.

  • Secure - Indicates whether the disk pool has drive security turned on (this is called secure enabled).

  • The remaining capacity notification settings (critical and early warning)

  • The priority settings

  • The associated volumes and free capacity

  • The associated drives

  • Data Assurance capabilities and presence of Data Assurance enabled volumes
  • Resource provisioning capabilities

Syntax​

show diskPool [<var id="GUID-1BE9F635-3F4B-4E85-B41B-1D696FA1AF5C__V1447556" className="keyword varname">diskPoolName</var>]

Parameter​

ParameterDescription
diskPool

The name of the disk pool for which you are retrieving information. Enclose the disk pool name in square brackets ([ ]). If the disk pool name has special characters or numbers, you must enclose the disk pool name in double quotation marks (" ") inside square brackets.

Notes​

Use this command to show the disk pool content of the storage array profile.