System setup and configuration
This chapter provides information on how to set up and configure your system.
- Initial Setup
To get up and running with your system, you install hardware components, configure host systems, and configure storage. - Rail kit installation instructions
This chapter includes information about rail kit installation instructions. - Cabling your storage system
You can cable a host directly to a controller or use switches to connect a host to a controller. If your storage system includes one or more drive shelves, you must cable them to your controller shelf. You can add a new drive shelf while power is still applied to other components of the storage system. In addition, you can connect your storage system to a network for out-of-band management. - Windows express configuration
This chapter describes how to configure a Windows-based host using the express configuration method. - VMware express configuration
This chapter describes how to configure a VMware-based host using the express configuration method. - Linux express configuration
This chapter describes how to configure a Linux-based host using the express configuration method.
Give documentation feedback