DCBX TLV statistics
When you select Data Center Bridging Exchange (DCBX) Type Length Value (TLV) Statistics, these statistics appear:
- Local statistics – The DCBX parameters configured on the controller at the factory.
- Operational statistics – The DCBX parameters that result from DCBX negotiations.
- Remote statistics – The DCBX parameters from the peer device that the controller is connected to, typically a switch.
| Statistic | Definition |
|---|---|
| iSCSI Host Port | Indicates the location of the detected host port in Controller #, Port # format. |
| Flow Control Mode | The Flow Control Mode of the entire port. Valid values are Disabled, Standard, Per Priority, or Indeterminate. |
| Protocol | The communication protocol. Valid values are FCoE, FIP, iSCSI, or UNKNOWN. |
| Priority | Integer value indicating the priority number of the communication. |
| Priority Group | Integer value representing the priority group to which the protocol has been assigned. |
| Priority Group % Bandwidth | Percentage value indicating the amount of bandwidth allocated to the priority group. |
| DCBX PFC Status | Priority-based Flow Control (PFC) status of the specific port. The value is either enabled or disabled. |
You can find additional DCBX TLV statistics in the state capture file.
Give documentation feedback