Physical Presence Policy Configuration
Use this menu to configure physical presence policy settings.
| Item | Operation | Description |
|---|---|---|
| Physical Presence Policy Configuration | ||
Physical Presence Policy |
| Selectable option. Enable/Disable "Remote Physical Presence Policy". The option is modifiable when "Physical Presence State" is asserted. Enabled allows Remote Physical Presence to be asserted without the need for Hardware Physical Presence. Once enabled, a time-out value is used to assert the policy for a specified number of minutes. NOTE: If moved to the Disabled state it will require Hardware Physical Presence to re-enable this policy. Enable is the default setting. Note If moved to the Disabled state, it will require Hardware Physical Presence to re-enable this policy. |
Minutes To Assert | 30 | Dynamic information. Number of minutes (range 1-100) to have Remote Physical Presence asserted. Physical Presence Policy must be Enabled and a value set to have remote physical Presence asserted. |
Physical Presence State |
| If Hardware Physical Presence Jumper is Asserted, the only way to de-assert Physical Presence is to change the jumper on the planar. Asserting allows Physical Presence to be set for a duration listed in minutes even if Hardware Physical Presence Jumper is not asserted. Asserting does not require a reboot. Both the Hardware Physical Presence Jumper on the planar and the Remote Physical Presence are Asserted. De-asserting turns off Physical Presence (unless the HW Physical Presence Jumper is asserted). De-asserting does not require a reboot. De-asserted is the default setting |
Toggle Remote Physical Presence Assert |
| Selectable option. Switch the Remote Physical Presence between Asserted and De-asserted when "Physical Presence Policy" is enabled. Note |