Skip to main content

System Settings

This menu displays the system settings.

Table 1. System Settings
ItemOptionsDescription
<F1> Start Control

  • Auto (Default)

  • Tool Suite

  • Text Setup

You can use the F1 key or send the IPMI command to control the tools.

  • [Tool Suite] starts a graphical suite of tools which support System Information, UEFI setup, Platform Update, Raid Setup, OS installation and Diagnostics functions.

  • [Text Setup] starts a text mode UEFI setup utility.

  • [Auto] starts text mode UEFI setup if Serial Over Lan (SOL) or "Console Redirection" are enabled or SOL is set to [Auto] and an active session is detected. Otherwise, [Auto] starts the graphical [Tool Suite].

Device and I/O ports

N/A

Display onboard devices and I/O port options.

Driver Health

N/A

Display health status of the drivers.

Foreign Devices

N/A

Display a list of foreign devices.

Legacy BIOS

N/A

Set the UEFI firmware execution environment preferences for supporting legacy OS and legacy Option ROM.

Memory

N/A

Display and provide options to change the memory settings.

Network

N/A

Display network devices and network related settings.

Operating Modes

N/A

Select the operating mode based on the preference.

Note
Power savings and performance are also highly dependent on hardware configuration and the software running on the system.
Power

N/A

Configures power plan options.

Processors

N/A

Display and provide options to change the processor settings.

Recovery and RAS

N/A

Configure recovery policies and advanced reliability, availability, and serviceability settings.

Security

N/A

Configure system security settings.

Storage

N/A

Manage storage adapter options. Some systems may use planar devices and can be configured in the Devices and I/O Ports menu.