Skip to main content

UPI Power Management

Note
SR250 V3, ST50 V3 and ST250 V3 do not support this function.
Table 1. UPI Power Management
ItemOptionsDescription
L1

  • Enabled (Default)

  • Disabled

Sets the desired power management level for the UPI interface. L1 saves the most power but has longer latency compared to L0p or [Disabled].

When a preset mode is selected, the low-level settings are not changeable and will be grayed out. To change the settings, choose System Settings > Operating Modes > Choose Operating Mode > Custom Mode.

Note
UPI is available only when two or more processors are installed.