Skip to main content

3808003 : .[3808003] Unable to retrieve the system configuration from the IMM.

.[3808003] Unable to retrieve the system configuration from the IMM.

Error Retrieving System Configuration from IMM

Severity

Warning

User Response

Complete the following steps:

  1. Use the Setup Utility to verify and save the settings (which will recover the settings).
  2. Reset the IMM from the CMM.
  3. Use CMM to remove auxilliary power from the compute node. This will reboot the compute node.
  4. Check the IBM support site for an applicable service bulletin or firmware update that applies to this error.
  5. Update the IMM Firmware.
  6. Remove and re-install CMOS battery for 30 seconds to clear CMOS content
  7. Replace the system board.