Completing the installation
Use this information to complete the installation.
To complete the installation, complete the following steps.
- If you removed the PCI riser-card assembly, reinstall it (see Replacing the PCI riser-card assembly).
- If you removed the air baffle, reinstall it (see Replacing the air baffle).
- If you removed the server cover, replace it (see Replacing the cover).
- Install the server in the rack cabinet (see the Rack Installation Instructions that come with the server for instructions).
- Reconnect the cables and power cords (see Connecting the cables).
- Update the server configuration (see Updating the server configuration).
- Slide the server back into the rack, if necessary.
- Start the server. Confirm that it starts correctly and recognizes the newly installed devices, and make sure that no error LEDs are lit.
- (IBM Business Partners only) Complete the additional steps in Instructions for IBM Business Partners.