Skip to main content

Removing the 240 VA safety cover

Use this information to remove the 240 VA safety cover.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component in the server, you need to turn off the server and peripheral devices, and disconnect the power cords and all external cables.

To remove the 240 VA safety cover, complete the following steps:

  1. Remove the cover (see Removing the cover).
  2. Remove any connected SAS/SATA signal cable and all other cables from the safety cover.

  3. Remove the four screws from the safety cover.

  4. Lift the safety cover up to remove it from the server.

If you are instructed to return the server component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.