Skip to main content

Clearing the error logs

Use this information to clear the event logs.

To clear the event logs, complete the following steps.
Note
The POST event log is automatically cleared each time the server is restarted.
  1. Turn on the server.
  2. When the prompt <F1> Setup is displayed, press F1. If you have set both a power-on password and an administrator password, you must type the administrator password to view the event logs.
  3. Use one of the following procedures:
    • To clear the IMM system-event log, select System Event Logs > System Event Log. Select Clear System Event Log; then, press Enter twice.