Skip to main content

Obtaining the IP address for the IMM

To access the web interface, you need the IP address for IMM. You can obtain the IMM IP address through the Setup utility. The server comes with a default IP address for the IMM of 192.168.70.125.

To locate the IP address, complete the following steps:

  1. Turn on the server.
    Note
    Approximately 20 to 40 seconds after the server is connected to power, the power-control button becomes active.
  2. When the prompt <F1> Setup is displayed, press F1. (This prompt is displayed on the screen for only a few seconds. You must press F1 quickly.) If you have set both a power-on password and an administrator password, you must type the administrator password to access the full Setup utility menu.
  3. From the Setup utility main menu, select System Settings.
  4. On the next screen, select Integrated Management Module.
  5. On the next screen, select Network Configuration.
  6. Find the IP address and write it down.
  7. Exit from the Setup utility.