Installing optional devices
This section provides detailed instructions for installing optional hardware devices in the server.
- Safety
Before installing this product, read the Safety Information. - Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. - Instructions for IBM Business Partners
In addition to the instructions in this section for installing optional hardware devices, updating firmware and device drivers, and completing the installation, IBM Business Partners must also complete the following steps. - Installation guidelines
Use this information for installation. - Removing the cover
Use this information to remove the cover. - Removing the DIMM air baffle
Use this information to remove the DIMM air baffle. - Removing the microprocessor 2 air baffle
Use this information to remove the microprocessor 2 air baffle. - Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Installing drives
The following notes describe the type of drives that the server supports and other information that you must consider when you install a drive. - Replacing a PCI riser-card assembly
Use this information to replace a PCI riser-card assembly. - Installing an adapter
Use this information to install an adapter. - Replacing a PCI Express assembly with a PCI-X assembly
Use this information to replace a PCI Express assembly with a PCI-X assembly. - Replacing a PCI-X assembly with a PCI Express assembly
Use this information to replace a PCI-X assembly with a PCI Express assembly. - Installing a ServeRAID SAS/SATA controller on the SAS/SATA RAID riser card
Use this information to install a ServeRAID SAS/SATA controller on the SAS/SATA RAID riser card. - Installing an optional ServeRAID adapter advanced feature key
Use this information to install an optional ServeRAID adapter advanced feature key. - Installing a hot-swap fan assembly
Use this information to install a hot-swap fan assembly. - Installing a hot-swap ac power supply
Use this information to install a hot-swap ac power supply. - Installing a USB embedded hypervisor flash device
Use this information to install a USB embedded hypervisor flash device. - Installing the virtual media key
Use this information to install the virtual media key. - Installing the optional two-port Ethernet adapter
Use this information to install the optional two-port Ethernet adapter. - Installing a RAID adapter battery remotely in the server
Use this information to install a RAID adapter battery remotely in the server. - Installing the DVD enablement kit
Use this information to install the DVD enablement kit. - Installing a SAS/SATA 4 Pac HDD option
Use this information to install a SAS/SATA 4 Pac HDD option. - Installing a second microprocessor and heat sink
Use this information to install a second microprocessor and heat sink. - Completing the installation
Use this information to complete the installation.
Give documentation feedback