Skip to main content

Installing the virtual media key

Use this information to install the virtual media key.

To install the virtual media key, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect the power cords.
  3. Remove the cover (see Removing the cover).
  4. Align the virtual media key with the mounting tab and slide it down the tab onto the connector on the system board. Press the virtual media key down into the connector until it is firmly seated on the system board.
    Figure 1. Virtual media key installation
    Virtual media key installation

If you have other devices to install or remove, do so now. Otherwise, go to Completing the installation.