Skip to main content

180-801-000 : Check-point Panel Test Aborted

Check-point Panel Test Aborted

Severity​

Warning

Serviceable​

Yes

Recoverable​

No

Automatically Notify Support​

No

User Response​

Complete the following steps:

  1. Inspect and reseat operator information panel cable at both ends.
  2. Verify that the Baseboard Management Controller (BMC) is working.
  3. Run the test again.
  4. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.