Skip to main content

264-903-000 : Tape Test Failed

Tape Test Failed

Severity​

Error

Serviceable​

Yes

Recoverable​

No

Automatically Notify Support​

No

User Response​

Complete the following steps:

  1. Clean the tape drive using the appropriate cleaning media and install new media.
  2. Run the test again.
  3. Make sure that the drive firmware is at the latest level.
  4. Rerun the test after upgrading to the latest firmware level.
  5. If the failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.