Skip to main content

Test results for the DSA CPU stress test

The following messages can result when you run the DSA CPU stress test.

  • 089-000-000 : CPU Stress Test Passed

    CPU Stress Test Passed.
    Recoverable
    No
    Severity
    Event
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 089-801-000 : CPU Stress Test Aborted

    CPU Stress Test Aborted. Internal Program Error.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Turn off and restart the system.
    2. Make sure that the DSA Diagnostic code is at the latest level.
    3. Run the test again.
    4. Check system firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component. The latest level firmware for this component can be found in reference to this system type at the IBM Support website.
    5. Run the test again.
    6. If the system has stopped responding, turn off and restart the system and then run the test again.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links

  • 089-802-000 : CPU Stress Test Aborted

    CPU Stress Test Aborted. System resource unavailability error.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Turn off and restart the system.
    2. Make sure that the DSA Diagnostic code is at the latest level.
    3. Run the test again.
    4. Check system firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
    5. Run the test again.
    6. If the system has stopped responding, turn off and restart the system and then run the test again.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links

  • 089-803-000 : CPU Stress Test Aborted

    CPU Stress Test Aborted. Memory size is insufficient to run the test. At least 1GB is required.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    Yes
    Automatically notify support
    No
    Related links

  • 089-804-000 : CPU Stress Test Aborted

    CPU Stress Test Aborted. User pressed Ctrl-C.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    Yes
    Automatically notify support
    No
    Related links

  • 089-901-000 : CPU Stress Test Failed

    CPU Stress Test Failed.
    Recoverable
    No
    Severity
    Error
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. If the system has stopped responding, turn off and restart the system and then run the test again.
    2. Make sure that the DSA Diagnostic code is at the latest level.
    3. Run the test again.
    4. Check system firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
    5. Run the test again.
    6. If the system has stopped responding, turn off and restart the system and then run the test again.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links