Skip to main content

Replacing the paddle card safety cover (240VA cover)

Use this information to replace the paddle card safety cover (240VA cover)

To install the paddle card safety cover, complete the following steps.

  1. Read the safety information that begins on page Safety and Installation guidelines.
  2. Install the screws to secure the safety cover on the power-supply paddle card assembly.
    Figure 1. Screws installation
    Screws installation
  3. Install the server top cover (see Replacing the server top cover.
  4. Reconnect the external cables; then, reconnect the power cords and turn on the peripheral devices and the server.