Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Replacing a hot-swap hard disk drive
Use this information to replace a hot-swap hard disk drive. - Rotating the hot-swap rear hard disk drive cage up
Use this information to rotate the hot-swap rear hard disk drive cage up. - Rotating the hot-swap rear hard disk drive cage down
Use this information to rotate the hot-swap rear hard disk drive cage down. - Removing the hot-swap rear hard disk drive cage
Use this information to remove the hot-swap rear hard disk drive cage. - Replacing the hot-swap rear hard disk drive cage
Use this information to replace the hot-swap rear hard disk drive cage. - Replacing the insulator sheet for the power cable
Use this information to replace the insulator sheet for the power cable - Removing the insulator sheet for the power cable
Use this information to remove the insulator sheet for the power cable - Removing an adapter from the PCI riser-card assembly
Use this information to remove an adapter from the PCI riser-card assembly. - Replacing an adapter on the PCI riser-card assembly
Use this information to replace an adapter on the PCI riser-card assembly. - Removing a front fan
Use this information to remove a front fan. - Replacing a front fan
Use this information to replace a front fan. - Removing a rear fan
Use this information to remove a rear fan. - Replacing a rear fan
Use this information to replace a rear fan. - Removing a memory module
Use this information to remove a memory module. - Replacing a memory module
Use this information to replace a memory module. - Removing a ServeRAID adapter from the PCI riser-card assembly
Use this information to remove a ServeRAID adapter from the PCI riser-card assembly. - Replacing a ServeRAID adapter on the PCI riser-card assembly
Use this information to replace a ServeRAID adapter on the PCI riser-card assembly. - Removing the RAID adapter battery or flash power module from the RAID battery tray
Use this information to remove the RAID adapter battery or flash power module from the RAID battery tray. - Replacing a RAID adapter battery or flash power module in the RAID battery tray
Use this information to replace a RAID adapter battery or flash power module in the RAID battery tray. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing a hot-swap ac power supply
Use this information to remove a hot-swap ac power supply. - Replacing a hot-swap ac power supply
Use this information to replace a hot-swap ac power supply. - Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly. - Replacing a PCI riser-card assembly
Use this information to replace a PCI riser-card assembly. - Removing the system battery
Use this information to remove the system battery. - Replacing the system battery
Use this information to replace the system battery. - Removing the front USB connector assembly cable
- Replacing the front USB connector assembly cable
Use this information to replace the front USB connector assembly cable. - Removing the front USB connector assembly
Use this information to remove the front USB connector assembly. - Replacing the front USB connector assembly
Use this information to replace the front USB connector assembly. - Removing the upper power supply card from the power-supply paddle card assembly
Use this information to remove the upper power supply card from the power-supply paddle card assembly. - Replacing the upper power supply card in the power-supply paddle card assembly
Use this information to replace the upper power supply card in the power-supply paddle card assembly. - Removing the lower power supply card from the power-supply paddle card assembly
Use this information to remove the lower power supply card from the power-supply paddle card assembly. - Replacing the lower power supply card in the power-supply paddle card assembly
Use this information to replace the lower power supply card in the power-supply paddle card assembly. - Removing the hot-swap hard disk drive backplane
Use this information to remove the hot-swap hard disk drive backplane. - Replacing the hot-swap hard disk drive backplane
Use this information replace the hot-swap hard disk drive backplane. - Removing the hot-swap backplane on the rear hard disk drive cage
Use this information to remove the hot-swap backplane on the rear hard disk drive cage. - Replacing the hot-swap backplane on the rear hard disk drive cage
Use this information to replace the hot-swap backplane on the rear hard disk drive cage.
Give documentation feedback