Skip to main content

16x2.5-inch and 16x1.8-inch drive model

The internal routing and connectors for the 16x2.5-inch and 16x1.8-inch drive model cables.

The following illustration shows the internal routing and connectors for the 16x2.5-inch and 16x1.8-inch drive model.
Note
Make sure that Port 1 on the hardware ServeRAID is connected to Port 1 on the backplane. Likewise, Port 0 on the hardware ServeRAID should be connected to Port 0 on the backplane.
Figure 1. 16x2.5-inch and 16x1.8-inch drive model cable connection (applicable to FLATWOODS ServeRAID M5210 SAS/SATA Controller)
16x2.5-inch and 16x1.8-inch drive model cable connection (applicable to FLATWOODS ServeRAID M5210 SAS/SATA Controller)
Figure 2. 16x2.5-inch and 16x1.8-inch drive model cable connection (applicable to RACINE RAID N2215 controller)
16x2.5-inch and 16x1.8-inch drive model cable connection (applicable to RACINE RAID N2215 controller)
The following illustration shows the internal routing and connectors for the 16x2.5-inch and 16x1.8-inch drive model cables.
Figure 3. 16x2.5-inch and 16x1.8-inch drive model cable connection
16x2.5-inch and 16x1.8-inch drive model cable connection