Skip to main content

24x2.5-inch drive model with 3 same backplanes

The internal routing and connectors for the 24x2.5-inch drive model cables.

The following illustration shows the internal routing and connectors for the 24x2.5-inch hot-swap HDD model.
Note
Make sure that Port 1 on the hardware ServeRAID is connected to Port 1 on the backplane. Likewise, Port 0 on the hardware ServeRAID should be connected to Port 0 on the backplane.
Figure 1. 24x2.5-inch hot-swap HDD model cable connection (applicable to FLATWOODS ServeRAID M5210 SAS/SATA Controller)
24x2.5-inch hot-swap HDD model cable connection (applicable to FLATWOODS ServeRAID M5210 SAS/SATA Controller)
Figure 2. 24x2.5-inch hot-swap HDD model cable connection (applicable to RACINE RAID N2215 controller)
24x2.5-inch hot-swap HDD model cable connection (applicable to RACINE RAID N2215 controller)
The following illustration shows the internal routing and connectors for the 24x2.5-inch hot-swap HDD model cables.
Figure 3. 24x2.5-inch hot-swap HDD model cable connection
24x2.5-inch hot-swap HDD model cable connection