DC power-supply LEDs

Use this information to view DC power-supply LEDs.

The following illustration shows the locations of the power-supply LEDs on the dc power supply.

Figure 1. DC power-supply LEDs

The following table describes the problems that are indicated by various combinations of the power-supply LEDs on a dc power supply and suggested actions to correct the detected problems.

The power-supply LEDs table with two rows of column headings for the DC power-supply LEDs combination and one row of column headings for the description, action, and notes.

DC power-supply LEDs			Description	Action	Notes
IN OK	OUT OK	Error (!)
On	On	Off	Normal operation.
Off	Off	Off	No dc power to the server or a problem with the dc power source.	Check the dc power to the server. Make sure that the power cord is connected to a functioning power source. Restart the server. If the error remains, check the power-supply LEDs. If the problem remains, replace the power-supply.	This is a normal condition when no dc power is present.
Off	Off	On	The power supply has failed.	Replace the power supply.
Off	On	Off	The power supply has failed.	Replace the power supply.
Off	On	On	The power supply has failed.	Replace the power supply.
On	Off	Off	Power-supply not fully seated, faulty system board, or the power supply has failed.	Reseat the power supply. Follow actions in the Power problems. Follow actions in Solving power problems until the problem is solved.	Typically indicates a power-supply is not fully seated.
On	Off	On	The power supply has failed.	Replace the power supply.
On	On	On	The power supply has failed.	Replace the power supply.