Removing the media cage
Use this information to remove the media cage.
To remove the media cage, complete the following steps:
- Read the safety information that begins on Safety and Installation guidelines.
- Turn off the server and peripheral devices and disconnect the power cords and all external cables, if necessary.
- Remove the top cover (see Removing the top cover).
- Disconnect the front USB, DVD drive and operator information panel/LCD panel cables from the system board. Please remember the relevant cable routing.NoteTo disconnect the operator information/LCD panel cable, press evenly on the connector first; then, pull the cable out.Figure 1. Cable routing
- Loosen the thumbscrew that is used to secure the media cage onto the server.Figure 2. Thumbscrew
- Carefully push the media cage out of the server and set it aside.Figure 3. Media cage removal
- If you are instructed to return the media cage, follow all of the packaging instructions, and use any packaging materials for shipping that are supplied to you.
Give feedback