Skip to main content

Turning on the server

Use this information for details about turning on the server.

Approximately 5 seconds after the server is connected to input power, one or more fans might start running and the power-on LED flashes quickly. Approximately 10 seconds after the server is connected to input power, the power-on button becomes active. After the power-on button becomes active, the power-on LED flashes slowly. You can turn on the server by pressing the power-on button.

If a power failure occurs while the server is turned on, the server will restart automatically when power is restored.
Note
To disable this feature in the Setup utility (see Using the Setup utility), select System Settings → Integrated Management Module → Power Restore Policy.