Skip to main content

Viewing event logs through the Setup utility

This topic provides instructions on how to view the event logs through the server Setup utility.

To view the UEFI/POST event log or system-event log, complete the following steps:

  1. Turn on the server.
  2. When the prompt <F1> Setup is displayed, press F1. If you have set both a power-on password and an administrator password, you must type the administrator password to view the event logs.
  3. Select System Event Logs and use one of the following procedures:
    • To view the POST event log, select POST Event Viewer.
    • To view the system-event log, select System Event Log.