Configuring network protocols
Use the information in this topic to view or establish network settings for the XClarity Controller.
- Configuring the Ethernet settings
Use the information in this topic to view or change how the XClarity Controller communicates by way of an Ethernet connection. - Configuring DNS
Use the information in this topic to view or change XClarity Controller Domain Name System (DNS) settings. - Configuring DDNS
Use the information in this topic to enable or disable Dynamic Domain Name System (DDNS) protocol on the XClarity Controller. - Configuring Ethernet over USB
Use the information in this topic to control the Ethernet over USB interface used for in-band communication between the server and the XClarity Controller. - Configuring SNMP
Use the information in this topic to configure SNMP agents. - Enabling or Disabling IPMI Network Access
Use the information in this topic to control IPMI network access to the XClarity Controller. - Configuring Network Settings with IPMI commands
Use the information in this topic to configure the network settings using IPMI commands. - Service Enablement and Port Assignment
Use the information in this topic to view or change the port numbers used by some services on the XClarity Controller. - Configuring Access Restriction
Use the information in this topic to view or change the settings that block access from IP addresses or MAC addresses to the XClarity Controller. - Configuring Front Panel USB Port to Management
Use the information in this topic to configure the XClarity Controller Front Panel USB Port to Management.
Give documentation feedback