Skip to main content

Service Enablement and Port Assignment

Use the information in this topic to view or change the port numbers used by some services on the XClarity Controller.

Click Network under BMC Configuration to view or modify XClarity Controller port assignments. Complete the following fields to view or modify port assignments:
Web
The port number is 80. This field is not user-configurable.
Web over HTTPS
In this field specify the port number for Web Over HTTPS. The default value is 443.
REST over HTTPS
The port number will automatically change to the one specified in the Web over HTTPS field. This field is not user-configurable.
CIM over HTTP
In this field specify the port number for CIM over HTTP. The default value is 5989.
Note
CIM is disabled by default.
Remote Presence
In this field specify the port number for Remote Presence. The default value is 3900.
IPMI over LAN
The port number is 623. This field is not user-configurable.
Note
IPMI is disabled by default.
SFTP
In this field specify the port number that is used for the SSH File Transfer Protocol (SFTP). The port number is 115. This field is not user-configurable.
Note
IMM.SFTPPortControl=open is required for OneCLI in-band updates.
SLP
In this field specify the port number that is used for the SLP. The port number is 427. This field is not user-configurable.
Note
There are two service types that XClarity Controller reports:
  • service: management-hardware.Lenovo:lenovo-xclarity-controller

  • service: wbem

SSDP
The port number is 1900. This field is not user-configurable.
SSH
In this field specify the port number that is configured to access the command line interface through the SSH protocol. The default value is 22.
SNMP Agent
In this field specify the port number for the SNMP agent that runs on the XClarity Controller. The default value is 161. Valid port number values are from 1 to 65535.
SNMP Traps
In this field specify the port number that is used for SNMP traps. The default value is 162. Valid port number values are from 1 to 65535.