Configuring the power restore policy

To configure how the server reacts when the power is restored after a power loss, use the information in this topic.

When configuring the power restore policy, the following three options are available:

Always Off

The server will remain powered off even when power is restored.

Restore

The server will automatically be powered on when power is restored if the server was powered on at the time that the power failure occurred. Otherwise, the server power will remain off when power is restored.

Note

Select the checkbox below to set a random delay between 1 and 15 seconds for Power On if the server was on before the power failure occurred.

Always On

The server will automatically power on when power is restored.

Click Apply after making the configuration changes.