Power actions
See the information in this topic to understand the power actions that can be made to the server.
Click Power Action in the Quick Action section of the XClarity Controller home page.
The following table contains a description of the power and restart actions that can be performed on the server.
Power Action | Description |
---|---|
Power On Server | Select this action item to power on the server and boot the operating system. |
Power Off Server Normally | Select this action item to shut down the operating system and power off the server. |
Power Off Server Immediately | Select this action item to power off the server without first shutting down the operating system. |
Restart Server Normally | Select this action item to shut down the operating system and power cycle the server. |
Restart Server Immediately | Select this action item to power cycle the server immediately without first shutting down the operating system. |
Boot Server to System Setup | Select this item to power on or reboot the server and automatically boot into system setup without needing to press F1 during boot. |
Trigger NMI (non-maskable interrupt) | Select this action item to force a Non-maskable Interrupt (NMI) on a “hung” system. Selection of this action item allows the platform operating system to perform a memory dump that can be used for debug purposes of the system hang condition. The auto reboot on NMI setting from the F1 system setup menu determines whether or not the XClarity Controller will reboot the server after the NMI. |
Schedule Power Actions | Select this action item to schedule daily and weekly power and restart actions for the server. |
Restart Management Controller | Select this action item to restart the XClarity Controller |
AC Power Cycle Server | Select this action to power cycle the server. |
Note
|
Give documentation feedback