Removing and replacing field replaceable units

Use this information to remove and replace field replaceable units (FRUs).

FRUs must be installed only by trained service technicians. The illustrations in this document might differ slightly from your hardware.

• Removing a microprocessor and heat sink
  Use this information to remove a microprocessor and heat sink from the blade server.
• Installing a microprocessor and heat sink
  Use this information to install a microprocessor and heat sink in the blade server.
• Removing the system-board assembly
  Use this information to remove the system-board assembly from the blade server.
• Installing the system-board assembly
  Use this information to install the system-board assembly in the blade server.