Removing and replacing Tier 1 customer replaceable units (CRUs)
Use this information for removing and replacing Tier 1 CRUs.
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
- Removing the blade server cover
Use this information to remove the blade server cover from the blade server. - Installing the blade server cover
Use this information to install the cover on the blade server. - Removing an optional expansion unit
Use these instructions to remove the optional expansion unit from the blade server. - Installing an optional expansion unit
Use these instructions to install an optional expansion unit. - Removing the bezel assembly
Use this information to remove the bezel assemble from the blade server. - Installing the bezel assembly
Use this information to install a bezel assembly in the blade server. - Removing a fixed-storage drive
Use this information to remove a fixed-storage drive from the blade server. - Installing a fixed-storage drive
Use this information to install a fixed-storage drive in the blade server. - Removing a hot-swap storage drive
Use this information to remove a hot-swap storage drive. - Installing a hot-swap storage drive
Use this information to install a hot-swap storage drive in the blade server. - Removing a memory module
Use this information to a memory module from the blade server. - Installing a memory module
Use this information to install a memory module in the blade server. - Removing a concurrent KVM card
Use this information to remove a CKVM card from the blade server. - Installing a concurrent KVM card
- Removing an I/O expansion card
Use this information to remove an I/O expansion card from the blade server. - Installing an I/O expansion card
Use this information to install an I/O expansion card in the blade server. - Removing a storage interface card
Use this information to remove a storage interface card from the blade server. - Installing a storage interface card
Use this information to install a storage interface card in the blade server. - Removing a high-speed expansion card
Use this information to remove a high-speed expansion card. - Installing a high-speed expansion card
Use this information to install a high-speed expansion card in the blade server. - Removing the battery
Use this information to the battery from the blade server. - Installing the battery
Use this information to install a battery on the system board in the blade server.
Give documentation feedback