Removing a concurrent KVM card
Use this information to remove a CKVM card from the blade server.
Note
- The following illustration shows how to remove the concurrent KVM (cKVM) card from the system board.
- The illustrations in this document might differ slightly from your hardware.
To remove a cKVM card, complete the following steps.
- Before you begin, read Safety and Installation guidelines.
- If the blade server is installed in a BladeCenter unit, remove it (see Removing the blade server from the BladeCenter unit).
- Remove the blade server cover (see Removing the blade server cover for instructions).
- If an optional expansion unit is installed, remove it (see Removing an optional expansion unit).
- If an I/O expansion card or a high-speed expansion card is installed, remove it (see Removing an I/O expansion card or Removing a high-speed expansion card).
- Gently pivot the narrow end of the card out of the cKVM card connectors; then, slide the notched end of the card out of the tabs on the expansion card bracket and lift the card out of the blade server.
- If you are instructed to return the cKVM card, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Give documentation feedback