Skip to main content

Parts listing - IBM MAX5

The following replaceable components are available for the IBMIBM MAX5 expansion blade. There are two versions of the IBM MAX5 expansion blade, referred to as the IBM MAX5 version 1 and IBM MAX5 version 2 in this document. IBM MAX5 version 2 has a "MAX5" identifying label on the bottom of the front bezel. The functionality of the two IBM MAX5 expansion blades are equivalent except for the type of DIMMs supported. The type of DIMMs supported will differ, depending on the version of IBM MAX5 expansion blade installed.

For an updated parts listing on the web, complete the following steps.
Note
Changes are made periodically to the IBM website. The actual procedure might vary slightly from what is described in this document.
  1. Go to thehttp://www.ibm.com/supportportal/.
  2. Under Product support, click BladeCenter.
  3. Under Popular links, click Part documents lookup.
  4. From the Product Family menu, select BladeCenter HX5 and click Go.
Note
The illustrations in this document might differ slightly from your hardware.

Graphic illustrating the components of the expansion blade
Replaceable components are of four types:
  • Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
  • Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service that is designated for your server.
  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

For information about the terms of the warranty and getting service and assistance, see the Warranty and Support Information document.

Table 1. Parts listing, IBM MAX5 version 1
IndexDescriptionCRU part number (Tier 1)CRU part number (Tier 2)FRU part number
1Cover (Type 7872 models)68Y7859  
1Cover (Type 7873 models)68Y7957  
2Memory, 4 GB, 2R x 8, 2 Gbit DDR-3 1333 MHz VLP DIMM 44T1586 
2Memory, 8 GB, 4R x 8, 2 Gbit DDR-3 1066 MHz VLP DIMM 46C7504 
 CPU tall heat sink, microprocessor (130W)
Note
This heat sink can be installed only in an BladeCenter HX5 blade server that has an IBM MAX5 expansion blade installed.
  44X2170
 IBM MAX5 expansion blade (version 1) 88Y6176 
 IBM MAX5 1-node scalability card 59Y5878 
 Miscellaneous parts kit 44X2168 
 DIMM fillers 60H2962 
Table 2. Parts listing, IBM MAX5 version 2
IndexDescriptionCRU part number (Tier 1)CRU part number (Tier 2)FRU part number
1Cover (Type 7872 models)68Y7859  
1Cover (Type 7873 models)68Y7957  
2Memory, 2 GB, 1R x 8, 2 Gbit PC3L-10600R-999 VLP RDIMM (1.35V capable) 46C0572 
2Memory, 4 GB, 2R x 8, 2 Gbit PC3L-10600R-999 VLP RDIMM (1.35V capable) 46C0576 
2Memory, 8 GB, 2R x 8, 4 Gbit DDR-3 1333 MHz VLP RDIMM (1.35V capable) 00D4987 
2Memory, 8 GB, 4R x 8, 2 Gbit PC3L-8500R-777 VLP RDIMM (1.35V capable) 46C0582 
2Memory, 16 GB, 2R x 4, 4 Gbit DDR-3 1333 MHz VLP RDIMM (1.35V capable) 49Y1528 
2Memory, 16 GB, 2R x 4, 4 Gbit DDR-3 1600 MHz VLP RDIMM 90Y3159 
2Memory, 16 GB, 4R x 4, 2 Gbit DDR-3 1066 MHz VLP RDIMM (1.35V capable) 90Y3223 
2Memory, 32 GB, 4R x 4, 4 Gbit DDR-3 1333 MHz VLP RDIMM (1.35V capable) 00D5010 
 CPU tall heat sink, microprocessor (130W)
Note
This heat sink can be installed only in an BladeCenter HX5 blade server that has an IBM MAX5 expansion blade installed.
  44X2170
 IBM MAX5 expansion blade (version 2) 88Y6129 
 IBM MAX5 1-node scalability card 59Y5878 
 Miscellaneous parts kit 44X2168 
 DIMM fillers 60H2962 

Miscellaneous Parts Kit

The following parts are provided in the miscellaneous parts kit:
  • Float plate assembly
  • Bezel screw
  • Heat sink baffle
  • Left filler plate
  • Right filler plate
  • Screw, M3x16 socket hex drive