Restoring the CMM manufacturing default configuration

Use this information to restore the CMM to its manufacturing default configuration.

Attention

When you restore the CMM to its manufacturing default configuration, all configuration settings that you made are erased. Be sure to save your current configuration before you restore the CMM to its default configuration, if you intend use your previous settings.

You can restore the CMM to its manufacturing default configuration in three ways:

• In the CMM web interface, select Reset to Defaults from the Mgt Module Management menu. All fields and options are fully described in the CMM web interface online help.
• In the CMM CLI, use the clear command (see clear command for information about command use).
• If you have physical access to the CMM, push the reset button and hold it for approximately 10 seconds (see CMM controls and indicators for the reset button location).

For information about restoring a saved CMM configuration, see Restoring a saved CMM configuration for information.