Skip to main content

Installation guidelines

Before you remove or replace a replaceable component or install an optional device, read the following information:

  • Before you begin, read Safety and Handling static-sensitive devices. This information will help you work safely.
  • When you install your new compute node, take the opportunity to download and apply the most recent firmware updates. This step will help to ensure that any known issues are addressed and that your compute node is ready to function at maximum levels of performance.

    To download the latest firmware and device drivers, go to the Lenovo Support Portal and select Converged HX Series.

  • Observe good housekeeping in the area where you are working. Place removed covers and other parts in a safe place.
  • Back up all important data before you make changes to hard disk drives.
  • Before you remove a compute node from the Lenovo ThinkServer n400 Enclosure Type 5495 chassis, you must shut down the operating system and turn off the compute node. You do not have to shut down the chassis itself.
  • Blue on a component indicates touch points, where you can grip the component to remove it from or install it in the compute node, open or close a latch, and so on.
  • For a list of supported optional devices for the compute node, see the Lenovo ServerProven website.