Skip to main content

Logging on to the web interface

Use this information to log on to the web interface.

To log on to the TMM web interface, complete the following steps:

  1. On a system that is connected to the server, open a web browser. In the Address or URL field, type the IP address or host name of the TMM to which you want to connect.
    Note
    If you are logging on to the TMM for the first time after installation, the TMM defaults to DHCP. The TMM network access tag provides the default host name of the TMM and does not require you to start the server.
  2. On the Login page, type the user name and password. If you are using the TMM for the first time, you can obtain the user name and password from your system administrator. All login attempts are documented in the system-event log.
    Note
    The TMM is set initially with user name of USERID and password of PASSW0RD(with a zero, not the letter O). You’d have read/write access, and must change the default password when you log in for the first time.
  3. Click Log in to start the session. The System Status and Health page provides a quick view of the system status.
Note
If you boot to the operating system while in the TMM GUI and the message Booting OS or in unsupported OS is displayed under System Status > System State, disable Windows 2008 or 2012 firewall or type the following command in the Windows 2008 or 2012 console. This might also affect blue-screen capture features.

netsh firewall set icmpsetting type=8 mode=ENABLE

By default, the icmp packet is blocked by Windows firewall. The TMM GUI will then change to OS booted status after you change the setting as indicated above in both the Web and CLI interfaces.