Skip to main content

806f011b-0c01ffff : The connector [PhysicalConnectorElementName] has encountered a configuration error. (FP LCD Cable)

The connector [PhysicalConnectorElementName] has encountered a configuration error. (FP LCD Cable)

This message is for the use case when an implementation has detected an Interconnect Configuration Error.

May also be shown as 806f011b0c01ffff or 0x806f011b0c01ffff

Severity

Error

Alert Category

Critical - Other

Serviceable

Yes

CIM Information

Prefix:PLAT

and ID:0266

SNMP Trap ID

50

Automatically Notify Support

Yes

User Response

  1. Check system event log is showing LCD cable sensor has deasserted.
  2. Reseat LCD cable on the system board.
  3. Reset LCD cable on LCD panel.
  4. Replace LCD cable.