Skip to main content

Removing the shelf supports

Use these instructions to remove the shelf supports from the Flex System Enterprise Chassis.

Before you remove the shelf supports, you must remove the chassis shelf and any components that are installed on the shelf. See Removing a chassis shelf for instructions.

To remove the shelf supports from the chassis, complete the following steps.


Graphic illustrating the removal of a shelf support from the chassis

  1. Starting with the left shelf support, slide the blue latch up to release the support; then, push the shelf support towards the rear of the chassis to disengage the shelf support tabs from the chassis slots.
  2. Remove the shelf support from the chassis and save it for future use.
  3. Repeat steps 1 and 2 for the right shelf support.