Skip to main content

806f040c-2003ffff : [PhysicalMemoryElementName] Disabled on Subsystem [MemoryElementName]. (DIMM 3)

[PhysicalMemoryElementName] Disabled on Subsystem [MemoryElementName]. (DIMM 3)

Severity

Info

Alert Category

System - Other

Serviceable

No

CIM Information

Prefix:PLAT

and ID:0131

Automatically Notify Support

No

User Response

  1. Make sure the DIMM is installed correctly.
  2. If the DIMM was disabled because of a memory fault (memory uncorrectable error or memory logging limit reached), follow the suggested actions for that error event and restart the server.
  3. Check the IBM support website for an applicable retain tip or firmware update that applies to this memory event. If no memory fault is recorded in the logs and no DIMM connector error LED is lit, you can re-enable the DIMM through the Setup utility or the Advanced Settings Utility (ASU).